1976 Ski Nautique parts--trailer--velvet drive

My 1976 Ski Nautique was parked near a storage shed that caught fire. It is no longer seaworthy so I have stripped most everything off the hull. Boat was in good operating condition before this mishap. Many good parts.

Trailer...$500
Velvet Drive transmission...$500
Lake water inlet...$15 with screen and elbow
Lifting eyes...$15 each
Hatch cover...$15
Fins...$100 each
Strut...$190 complete with prop shaft, stuffing box and flange
Shaft
Stuffing box
Flange
Steering assembly...$150 complete with cable and wheel
Steering cable 17'
Steering wheel
Control assembly w/cables 17'...$75
Motor mounts...$5 ea
Bow light...$20
Engine cover w/hinges...$50
Flywheel, flex plate, dust cover for 351W
Bellhousing 351W
Crank shaft 351W
Solenoid, regulator, resistor block...$10
Thermostat housing...$20

Yes, good condition. Yes, they fit 351W. I do not know about clearance issues between engine and engine cover on your boat.

I tested them on the engine before I removed them. No leaks, no overheat, no water in oil.
I can get them tested locally if you want to pay for the testing.

iamabuyer wrote: I tested them on the engine before I removed them. No leaks, no overheat, no water in oil. I can get them tested locally if you want to pay for the testing.

I question a "test" while on the engine. On the engine you can't see inside the exhaust cavity!!

How much for the T-handle drain plug?

I'll order some off of ski dim then. Thanks for your time though!

iamabuyer wrote: They are worth $100 each just to have as spares. The shipping will kill ya. Maybe you should buy new locally?

Neil,
I highly recommend pressure testing the manifolds if you want to sell them. Ones with leaks really aren't even good are spares. Do it yourself. Make a block off plate for the top where the riser is bolted on, fill them with water and add compressed air.

Would like to buy the ski pylon (tower) if available, and the back lift ring set if its complete. Thanks, Cliff

I'm interested in the 5-gauges, 1-tach, and trans. cooler. Are they still available?
Thanks

I will take the control assembly with cable if you still have it?

fedexrc wrote: hi, i need the windshield frame, without glass, can you take out the windshield glass? i will pay $200 and ship to argentina

I don't have any idea how to ship to Argentina. Sorry.

Got everything that I had Purchased from you in great condition and in a timely manner!
Really enjoyed dealing with you and I might be interested in your exhaust manifolds once
I"ve done a little more research.

I want the rudder assembly ..do you still have it ..